Description
WPS water grade Polyethersulfone cartridges are designed for purified water use, wherever a cost effective membrane filter is required. WPS cartridges are flushed with 17+ megohm-cm water to remove potential extraneous manufacturing debris. Priced below general purpose cartridges. WPS cartridges are still manufactured with the same careful attention to both quality and performance.
Maximum Operating Parameters
• Micron Rating: 0.22 Micron
• Maximum Operating Temperature*: 180°F (82°C) at 10 psid in water
• Forward Differential Pressure: 50 psi (3.4 bar) at 20°C
• Reverse Differential Pressure: 40 psi (2.7 bar) at 20°C
• Recommended Changeout Pressure: 35 psid (2.4 psid)
Construction Materials
• Filtration Media: Polyethersulfone• Filtration Media Support: Polypropylene
• End Caps: Polypropylene
• Center Core: Polypropylene
• Outer Support Cage: Polypropylene• Sealing Method: Thermal Bonding
Dimensions (Cylindrical)
• Length: 5 to 40″ (12.7 101.6 cm) nominal
• Outside Diameter: 2.75″ (7.0 cm) nominal
• Surface Area: 7.0 ft2 (0.65 m2) Per 10″ length
Applications
Final Filtration of:
• Purified Water
