Description
Built with nearly 700 lbs of iron and steel for heavy-duty cycles with maximum stability and precision. The 52″ industrial T-Glide fence assembly provides smooth operation, expansive work surface, precision measurement, and sure lockdown without deflection.
- 99% dust collection is delivered above the table with the included Dust Collection Blade Guard, and below the table with advanced shrouding around the blade.
- The heavy-duty arbor shaft and bearings are built to withstand heavy duty-cycle environments, and the poly V-ribbed belts provide better torque and less vibration.
- An interrupt switch on the access doors and an integrated Lock-Out Tag-Out switch cut power to the saw ensuring that only authorized users can operate the saw.
Motor: 7.5 HP, 3 phase, 480V, 9A, 60Hz, TEFC
Rip Capacity: 52″
Blade: 40-tooth Titanium, 5/8″ arbor
Blade diameter: 10″
Blade tilt: Left
Blade kerf: 0.118″
Blade plate thickness: 0.078″
Max. depth of cut, blade at 0°: 3-1/8″
Max. depth of cut, blade at 45°: 2-1/4″
Max. rip, left of blade: 12-1/2″
Dado diameter: 10″
Dado max. width: 29/32″
Arbor diameter at blade: 5/8″
Arbor Runout: 0.001″ Maximum allowable runout
Main bearing size: 62mm OD x 30mm ID
Second bearing size: 52mm OD x 25mm ID
Table in front of blade (max. elevation): 10-3/4″
Table behind blade (max. elevation): 10″
Arbor Runout: 0.001″ Maximum allowable runout
Table flatness measured diagonally: 0.010″ Maximum gap
Belts: 2 V-ribbed belts – arbor b. static dissipative
Blade alignment with miter slot: 0.010″ Maximum displacement
Deviation of miter gauge indexing stops from actual: ±0.25°
Alignment between splitter and blade: 0.010″ Maximum difference
Miter slots T-shaped: 3/4″ at top, 1″ at bottom, 3/8″ deep
Miter slots center: 11-1/8″ center-to-center
Miter slots info: 5-1/2″ (arbor flange to center of right slot)
Dust collection port diameter: 4″
Dust collection blade guard: polycarbonate, extends only 1-3/16″ to right of blade
Blade guard: (dust collection) port diameter 1-1/2″ Outside, 1-1/4″ Inside
Insert: zero clearance, phenolic core, melamine surfaces
Hand wheels: 8″ diameter, cast iron with chrome handle
Riving knife / splitter thickness: 0.090″
Extension table: 24″W x 30″D
Extension wings: 10″W x 30″D
Overall size: 85-1/4″ W x 36-1/2″D x 34″H
Assembled weight: 685 lbs.
Includes
2 cast iron extension wings
miter gauge
dust collection blade guard
riving knife
2 blade wrenches
push stick
10″ blade
standard lockdown insert
standard brake cartridge
2 hardware packs
3 hex keys
blade spacing adjustment gauge
manual
